Quick Assembly Connector (also named “ No-Polish Connector ” , “Pre-polish Connector” or “ Fast Connector ”) is an easy-to-install device. No tool or jig is required. It is universal for 250um /900um / 2.0mm / 3.0mm / Flat Cable.
it was designed for fast termination with pre-polished connector. Using V groove technology, it requires no epoxy. With transparent body, the connecting result can be seen by Fiber Checker immediately. This is an ideal solution, either for outside plant or inside a building.
|Applicable for||3.1 x 2.0 mm Drop cable|
|Optical fiber diameter||125μm ( 657A & 657B )|
|Tight buffer diameter||250μm|
|Fiber mode||Single mode|
|Operation time||About 100s(no fiber cut)|
|Insert loss||≤ 0.3dB(1310nm & 1550nm)|
|Fastening strength of naked fiber||>5 N|
|Fastening strength of naked fiber holder||>10 N|
|Tensile strength||>50 N|
|On-line tensile strength (20 N)||IL ≤ 0.2dB RL ≤ 5dB|
|Mechanical durability (500 times)||IL ≤ 0.2dB RL ≤ 5dB|
Drop-off test (drop-off height 4m,
once per direction, totally 3 times)
IL ≤ 0.2dB RL ≤ 5dB